Zebra Display - Panasonic HDC-SX5 Operating Instructions Manual

2
Move the cursor button left or
right to adjust the microphone
input level.
A Left
B Right
C Microphone input level
≥ A gain value for each of the 2 built-in
microphones is displayed. (The input level of
the microphones cannot be set individually.)
3
Press the cursor button to set
and then press the MENU button
to finish the setting.
D
D Microphone input level meter
≥ Microphone input level meter is displayed on
the screen.
To return to automatic setting
Press the MENU button, then select [VIDEO] >
[MIC LEVEL] > [AUTO] and press the cursor
button.
≥ Adjust the gain value so that the last 2 bars of
the microphone input level on the centre of the
screen will not light red. (Otherwise, the sound
is distorted.) Select a lower setting for gain
value or set [MIC LEVEL] to [AUTO].
≥ The microphone input level meter displays the
microphone input level for the built-in
microphone with the larger volume.
≥ When [ZOOM MIC] is [ON], the volume will be
different depending on the zoom rate. Set
[ZOOM MIC] to [OFF] or set the microphone input
level after adjusting the zoom rate. (l 60)

Zebra display

This is for displaying the parts that
are too bright.
Parts where white saturation (colour saturation)
is likely to occur (extremely brightly lit or shiny
parts) are displayed with diagonal lines (zebra
pattern).
¬ Rotate the mode dial to select
.
Press the MENU button, then select
[ADVANCED]
#
press the cursor button.
A Zebra pattern
≥ You can record an image with little white
saturation if you manually adjust the shutter
speed or brightness (iris/gain) (l 76).
To cancel the zebra display
Press the MENU button, then select
[ADVANCED] # [ZEBRA] # [OFF] and press
the cursor button.
≥ The zebra pattern does not appear on the
images actually recorded.
Recording
VIDEO
[ZEBRA] [ON] and
#
A
VQT1G66
PHOTO
or
71