How To Use The Cursor Button - Panasonic HDC-SX5 Operating Instructions Manual

Setup
ª Concerning the SD card
≥ Do not touch the terminals on the back of the
SD card.
≥ Electrical noise, static electricity or the failure
of this unit or the SD card may damage or
erase the data stored on the SD card. Save
important data recorded on this unit to a PC
using the USB cable (supplied), HD Writer
2.0E for SX/SD etc. (l 123) (We recommend
using HD Writer 2.0E for SX/SD to acquire
data recorded on this unit.)
≥ When using an SD card on which data has
been written many times, the remaining time
left for recording may be reduced. (l 52)
ª Card access lamp [ACCESS]
≥ When this unit accesses the SD card (reading,
recording, playback, erasing, etc.), the access
lamp A lights up.
≥ If the following operations are performed when
the access lamp is lit, then the SD card or the
recorded data may be damaged or this unit
may malfunction.
jOpening the card slot cover and removing
the SD card
jOperating the mode dial
jRemoving the battery or disconnecting the
AC adaptor
38
VQT1G66

How to use the cursor button

This unit has a cursor button A for selecting
functions, performing operations, etc. so it is
easy to operate this unit with one hand.
B Operating the operation icons and menu
screens that are displayed
Basic operations
Operations on the menu screen and selection of
files on the thumbnail view screen, etc.
Move the cursor button up, down,
left, or right to select an item or
scene, and then press the cursor
button to set it.
1
3
4 4
2
1 Select by moving up.
2 Select by moving down.
3 Select by moving left.
4 Select by moving right.
5 Press the cursor button to set the item.
≥ Menu screen operations (l 44)
5