Un-Finalizing A Dvd-Rw; Creating A Top Menu - Panasonic HDC-SX5P Operating Instructions Manual

Disc and card management

Un-finalizing a DVD-RW

This is for un-finalizing a DVD-RW so
that it can be used for recording.
HD mode
¬ Rotate the mode dial to select
and then select the [
STD mode
¬ Rotate the mode dial to select
1
Press the MENU button, then
select [DISC SETUP]
[UN-FINALIZE]
the cursor button.
2
When the confirmation message
appears, select [YES], then press
the cursor button.
≥ When un-finalizing is complete, press the
MENU button to exit the message screen.
≥ (HD mode) Discs other than DVD-RW cannot
be un-finalized. If there is no space remaining
on the DVD-RW, the disc may not be
un-finalized.
≥ (STD mode) Discs other than DVD-RW (Video
format) cannot be un-finalized. DVD-RW (VR
format) after finalization can be recorded and
edited in the same way as DVD-RW (VR
format) before finalization.
≥ When you un-finalize the disc, use a battery
with sufficient battery power or the AC adaptor.
96
VQT1J42
ＨＤ ＨＤ ＨＤ ＨＤ
-ＲＷ -ＲＷ （Ｖ）
] tab.
.
#
#
[YES] and press
MENU

Creating a top menu

A top menu is displayed when a
DVD-RAM is played back on other
devices that support AVCHD.
¬ Rotate the mode dial to select
and then select the [
1
Connect this unit to the AC adaptor.
≥ Creating a top menu cannot be executed when
using a battery.
≥ If the power supply stops while creating a top
menu, the data may be damaged.
2
Press the MENU button, then
select [DISC SETUP]
[CREATE TOP MENU]
and press the cursor button.
3
When the confirmation message
appears, select [YES], then press
the cursor button.
≥ After creating the top menu, press the MENU
button to exit the message screen.
≥ If a top menu is created, the disc becomes
play-only and you can no longer record.
≥ The top menu is not displayed on the unit, but it
will be displayed when the disc is played back
on other devices that support AVCHD.
≥ Except for DVD-RAM, the top menu is created
during finalizing.
ª Deleting the top menu
If you insert a DVD-RAM on which a top menu was
created, the confirmation message appears when you
set a recording mode. If you select [YES] to erase the
top menu, the DVD-RAM can be recorded and edited
in the same way as before the top menu was created.
ＨＤ ＨＤ ＨＤ ＨＤ
ＲＡＭ
] tab.
#
#
[YES]
MENU