Panasonic HDC-SX5 Operating Instructions Manual page 146

Others
ª With a computer
Problem
Even if connected by the
USB cable, this unit is not
recognised by the
computer.
When the USB cable is
disconnected, an error
message will appear on
the computer.
Cannot see the PDF
operating instructions for
HD Writer 2.0E for SX/SD.
If scenes do not change smoothly when played back on another device
The images may be still for several seconds at the joins between the scenes if the following operations
are performed when multiple scenes have been continuously played back using another unit.
* Just how smoothly the scenes will be played back continuously depends on the playback unit.
Depending on the unit used, the images may stop moving and become still for a moment even when
none of the following conditions are applicable.
ª When the scenes were recorded on different dates
A The image will be still for several seconds wherever the date changes.
B The images are played back smoothly if the scenes were recorded on the same date.
146
VQT1G66
≥ Is the AC adaptor connected?
# Use the AC adaptor when connecting this unit and a computer.
≥ Select another USB terminal on the computer.
≥ Check the operating environment. (l 115)
≥ Turn the power to the unit off and then back on again and reconnect
the USB cable.
≥ To disconnect the USB cable safely, double-click the
in the task tray and follow the instructions on the screen.
≥ Is Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later
installed on the computer that you are using?
# You will need Adobe Acrobat Reader 5.0 or later or Adobe
Reader 7.0 or later to read the PDF operating instructions for
HD Writer 2.0E for SX/SD.
Check points
( ) icon