Panasonic HDC-SX5 Operating Instructions Manual page 103

2 Connecting with the component cable (supplied) and the AV cable
(supplied)
≥ Use the AC adaptor to free you from worrying about the battery running down.
1
Connect this unit and a TV with the component cable (supplied) and the
AV cable (supplied).
A Component cable (supplied)
B AV cable (supplied)
≥ Connect to terminals of the same colour.
≥ The component terminal C is for outputting images only so be sure to also connect the AV cable.
(Insert it in the audio input terminal for the component terminal input. Refer to the operating
instructions of the TV for details.)
≥ If your TV is not equipped with AV Input Sockets, the 21-pin Adaptor D (optional) is necessary.
Consult your dealer.
2
Set the mode dial to
3
Select the input channel on the TV.
Example:
Select the [Component] channel etc.
(The name of the channel may differ depending on the connected TV.)
4
Start playback on this unit.
The image and audio are output on the TV.
ª About the setting when connecting the component terminals
When this unit is connected to a TV with the component cable, the output setting on this unit can be
changed. Set it to match the terminal on the TV that you connect to.
Press the MENU button, then select [SETUP]
item and press the cursor button.
[576i]: When connecting to the component terminal on the TV compatible with 576i.
(Playback is in standard quality.)
to turn on the power.
With other products
[COMPONENT OUT] desired
>
PHOTO
VIDEO
103
VQT1G66