Dividing A Scene To Delete - Panasonic HDC-SX5 Operating Instructions Manual

High definition video camera
Hide thumbs Also See for HDC-SX5:
Table of Contents

Advertisement

Editing
3
(Only when [SELECT] is selected in step 2)
Select the scene to be deleted,
then press the cursor button.
The selected scene is encircled by a red frame.
≥ When the cursor button is pressed again, the
selected scene will be cancelled.
≥ Up to 99 scenes (HD mode)/8 scenes (STD
mode) can be set in succession.
4
(Only when [SELECT] is selected in step 2)
Press the
5
When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥ You can also delete scenes by pressing the
MENU button, selecting [EDIT SCENE] #
[DELETE] and then selecting [ALL SCENES]
(HD mode)/[ALL] (STD mode) or [SELECT].
≥ To delete an unwanted part of a scene, divide
the scene first, and then delete the
unnecessary part. (l 86)
≥ Scenes which cannot be played back (the
thumbnails are displayed as [
deleted.
≥ Protected scenes cannot be deleted.
≥ Do not open the card slot cover while deleting.
The deletion will stop.
≥ In case of [ALL SCENES] (HD mode)/[ALL]
(STD mode), the deletion may take time if
there are many scenes on the disc or SD card.
≥ Do not turn off this unit while deleting.
≥ When you delete scenes, use a battery with
sufficient battery power or use the AC adaptor.
86
VQT1G66
button.
]) cannot be
≥ If you delete scenes recorded on other
products with this unit, all the data related to
the scenes may be deleted.
≥ (STD mode) It may not be possible to delete
scenes that have been divided.

Dividing a scene to delete

This is for dividing a scene into two to
delete an unnecessary portion.
To delete an unnecessary portion of a scene, first
divide the scene and then delete the
unnecessary portion.
HD mode
¬ Rotate the mode dial to select
and then select the [
STD mode
¬ Rotate the mode dial to select
1
Press the MENU button, then
select [EDIT SCENE] # [DIVIDE]
# [SET] (HD mode) or [YES]
(STD mode) and press the cursor
button.
2
Select the scene to be divided,
then press the cursor button.
The selected scene is played back.
VIDEO
] or [
] tab.
.
MENU

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents