To Disconnect Usb Cable Safely; Verifying The Unit Is Correctly Recognised By The Computer - Panasonic HDC-SX5 Operating Instructions Manual

With a computer
may no longer be possible for this unit to read
the SD card.
≥ Always use this unit to format SD cards.
≥ When data not supported by this unit has been
recorded on a computer, it will not be
recognised by this unit.
To disconnect USB cable
safely
1
Double click the
task tray displayed on the
computer.
≥ Hardware disconnect dialogue appears.
≥ Depending on your computer's settings, this
icon may not be displayed.
2
Select [USB Mass Storage
Device] and click [Stop].
When using a disc:
≥ Verify [MATSHITA HDC-SX5(DVD) USB
Device] is selected and click [OK].
When using an SD card:
≥ Verify [MATSHITA HDC-SX5(SD) USB Device]
is selected and click [OK].
≥ Click [Close], and you can safely disconnect
the USB cable.
≥ Do not disconnect the USB cable while the
ACCESS/PC lamp or card access lamp lights
( appears on the LCD monitor) as it may
damage the data.
122
VQT1G66
( ) icon in
Verifying the unit is correctly
recognised by the computer
To verify this unit is correctly recognised by the
computer, connect the unit to the computer with a
USB cable, select [PC CONNECT (DISC)] or
[PC CONNECT (CARD)] on the USB function
selection screen and then follow the steps below.
≥ With some computers including those made by
NEC, the Device Manager may not be
displayed if a mode that places restrictions on
the functions has been established. Consult
the manufacturer or follow the steps in your
computer's operating instructions to establish a
mode in which all the functions can be used,
then proceed with operation.
1
(When using Windows XP/2000)
Select [start]
[Control Panel]
and Maintenance]
(When using Windows Vista)
Select [start]
#
[System and Maintenance]
[Device Manager].
2
(When using Windows XP/2000)
Click the [Hardware] tab, then
click [Device Manager].
([Settings]
# #
([Performance
#
) [System].
#
[Control Panel]
#
)
#