Table of Contents
Advertisement
Note:
To enable voice VLAN function for the LAG member port, please ensure its member state accords
with its port mode.
If a port is a member port of voice VLAN, changing its port mode to be "Auto" will make the port
leave the voice VLAN and will not join the voice VLAN automatically until it receives voice streams.
The following entries are displayed on this screen:
Port Config
Port Select:
Select:
Port:
Port Mode:
Figure 9-13 Port Config
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select the desired port for voice VLAN configuration. It is
multi-optional.
Displays the port number of the Switch.
Select the mode for the port to join the voice VLAN.
Auto: In this mode, the switch automatically adds a port to the
voice VLAN or removes a port from the voice VLAN by
checking whether the port receives voice data or not.
Manual: In this mode, you can manually add a port to the
voice VLAN or remove a port from the voice VLAN.
137
Advertisement
Table of Contents
