Table of Contents
Advertisement
Port:
NTDP:
13.2.3 NTDP Config
On this page you can configure NTDP globally.
Choose the menu Cluster→NTDP→NTDP Config to load the following page.
The following entries are displayed on this screen:
Global Config
NTDP:
NTDP Interval Time:
NTDP Hops:
Displays the port number of the switch.
Displays NTDP status (enabled or disabled) of the current port.
Figure 13-8 NTDP Config
Select Enable/Disable NTDP for the switch globally.
Enter the interval to collect topology information. The default is 1
minute.
Enter the hop count the switch topology collects. The default is 3
hops.
209
Advertisement
Table of Contents
