TP-Link TL-SL5428E User Manual page 89

Choose the menu VLAN→Private VLAN→Port Config to load the following page.
The following entries are displayed on this screen:
Port Config
Port:
Port Type:
Primary VLAN:
Secondary VLAN:
Private VLAN Port Table
Port ID:
Port Type:
Operation:
Note:
1. A Host Port can only join to a Private VLAN.
2. A Promiscuous Port can only join to a Primary VLAN.
3. If you want to add a Promiscuous port to different Private VLANs with the same Primary VLAN,
you need to add the Promiscuous port to any one of these Private VLANs.
Configuration Procedure:
Step Operation
1 Create Private VLAN.
2 Add ports to Private VLAN
3 Modify VLAN.
Figure 6-18 Create and View Protocol Template
Select the desired port for configuration.
Select the Port Type from the pull-down list for the port.
Specify the Primary VLAN the port belongs to.
Specify the Secondary VLAN the port belongs to.
Displays the port number.
Displays the corresponding Port Type.
Click Remove to delete the port.
Description
Required. On the VLAN→Private VLAN→PVLAN page,
Enter the Primary VLAN and Secondary VLAN, and then
click the Create button.
Required. On the VLAN→Private VLAN→Port Configure
page, select the desired ports and configure the port types
and click the Add button.
Optional. On the VLAN→Private VLAN→PVLAN page,
select the desired Private VLAN and do the modification,
then click the Apply button to modify the information of the
corresponding VLAN.
81