Table of Contents
Advertisement
Chapter
Chapter 12 SNMP
Chapter 13 Cluster
Chapter 14 Maintenance
Chapter 15 System
Maintenance via FTP
Appendix A Specifications
Appendix B Configure the PCs
Appendix C 802.1X Client
Software
Appendix D Glossary
Introduction
This module is used to configure SNMP function to provide a
management frame to monitor and maintain the network devices.
Here mainly introduces:
SNMP Config: Configure global settings of SNMP function.
Notification:
Configure
management station to monitor and process the events.
RMON: Configure RMON function to monitor network more
efficiently.
This module is used to configure cluster function to central
manage the scattered devices in the network. Here mainly
introduces:
NDP: Configure NDP function to get the information of the
directly connected neighbor devices.
NTDP: Configure NTDP function for the commander switch to
collect NDP information.
Cluster: Configure cluster function to establish and maintain
cluster.
This module is used to assemble the commonly used system
tools to manage the switch. Here mainly introduces:
System Monitor: Monitor the memory and CPU of the switch.
Log: View configuration parameters on the switch.
Cable Test: Test the connection status of the cable connected
to the switch.
Loopback: Test if the port of the switch and the connected
device are available.
Network Diagnose: Test if the destination is reachable and the
account of router hops from the switch to the destination.
Introduces how to download firmware of the switch via FTP
function.
Lists the glossary used in this manual.
Introduces how to configure the PCs.
Introduces how to use 802.1X Client Software provided for
authentication.
Lists the glossary used in this manual.
5
notification
function
Return to CONTENTS
for
the
Advertisement
Table of Contents
