Mac Acl - TP-Link TL-SL5428E User Manual

ACL ID:
Rule Order:

10.2.3 MAC ACL

MAC ACLs analyze and process packets based on a series of match conditions, which can be the
source MAC addresses, destination MAC addresses, VLAN ID, and EtherType carried in the
packets.
Choose the menu ACL→ACL Config→MAC ACL to load the following page.
The following entries are displayed on this screen:
Create MAC ACL
ACL ID:
Rule ID:
Operation:
S-MAC:
D-MAC:
MASK:
VLAN ID:
EtherType:
Enter ACL ID of the ACL you want to create.
User Config order is set to be match order in this ACL.
Figure 10-6 Create MAC Rule
Select the desired MAC ACL for configuration.
Enter the rule ID.
Select the operation for the switch to process packets which match the
rules.
Permit: Forward packets.
Deny: Discard Packets.
Enter the source MAC address contained in the rule.
Enter the destination MAC address contained in the rule.
Enter MAC address mask. If it is set to 1, it must strictly match the
address.
Enter the VLAN ID contained in the rule.
Enter EtherType contained in the rule.
144