Solution16
User Guide
Plus
Comms > Registration >
Customer
Reserved for future use
Email Reporting
In addition to Back to Base monitoring you can also configure
your Solution 16
to send selected reports to an email address
Plus
of your choice. To activate email reporting, simply enter the
email address in MENU 5-5-8 and then select the required report
types in MENU 5-5-9.
The Site Name in MENU 7-7-7 is used in the email subject line
when email reporting. You should also program this name to
make it easier to identify email sent from the Solution 16
To cancel email reporting simply remove the email address by
going to MENU 5-5-9 and then pressing the [OFF] key followed
by the [OK] key.
Currently email reporting functionality is only available
i
for panels located in Australia.
Note
Comms > MyAlarm >
Email Address
This menu allows the master user to program an email address
that the system will send email reports to. A maximum of 80
characters can be used to program the email address.
1. Enter your Master PIN + [MENU].
2. Enter [5] + [5] + [8] + [OK].
The keypad will display the current email address.
Email P001
_
Press
3. Use the numeric, [0] to [9], [] and [] keys to enter or
change the email address as required.
At any time you can use the [] and [] keys to scroll through
the complete list of available characters.
To clear all characters from the cursor position to the right,
press the [OFF] key.
4. When the email address is complete, press [OK] to save
and exit, or press [MENU] to exit without saving.
To stop email reporting simply remove the email address or
disable all of the email options in MENU 5-5-9.
When entering an email address the @ symbol is
i
represented
on
Note
To enter this character press the 1 key repeatedly until
the symbol appears in the display.
22
MENU 5-5-0
MENU 5-5-8
OK to SAVE
the
keypad
display
Comms > MyAlarm >
Email Options
This menu allows the master user to select which event types will
be reported using the email reporting function. By default the
first 4 options are set to report via email. Follow the procedure
below to configure the required options.
Option
1
2
3
4
panel.
Plus
5
6
7
8
1. Enter your Master PIN + [MENU].
2. Enter [5] + [5] + [9] + [OK].
The keypad will display the list of current options. Options
with a preceeding tick mark are selected.
3. Use the [
want to program, then use the [ON] and [OFF] keys to turn
on and off the features as required.
4. When all email options are programmed, press [OK] to
save and exit, or press [MENU] to exit without saving.
Comms > Periodic Test >
Send Test Report
This menu allows you to test the reporting functions of the
Solution 16
Plus
to the receiving party (i.e. security company monitoring station,
mobile telephone etc).
1. Enter [MENU] + [5] + [9] + [0].
The keypad will prompt that it is in the process of sending
a test report.
as
.
If the test is successful, the keypad will prompt:
Description
Open/Close Reports
Zone Alarm Reports
Zone Trouble Reports
System Reports
Access Reports
Reserved
Reserved
Reserved
Table 6: Email Options
Open / Close
Zone Alarm
Zone Trouble
Press
OK ON OFF MENU
] and [
] keys
to highlight the feature that you
control panel by manually sending a 'Test' report
Comms testing in
progress. Please wait..
To Go Back Press OK
Bosch Security Systems 03/10 BLCC100U
MENU 5-5-9
Default
Send Reports
Send Reports
Send Reports
Send Reports
Dont Send Reports
MENU 5-9-0