Access > Token >
Add Token
This menu allows a Master user the ability to add a new token
for for those users that have been assigned to the same area(s)
as the Master user.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [2] + [0].
A list of users will display on the keypad.
2. Use the [] and [] keys to select the user that you want to
add a token for, then press [OK] to select.
U001 JOHN SMITH
U002 DEBBIE SMITH
U003 USER 3 NAME
Press
3. If you are using a keypad with built in reader the system
will prompt you to present the token to the keypad. Once
the token is presented the keypad we beep and return to
the menu.
To Add token for U001
JOHN SMITH swipe new
token
A Master user can only delete a PIN for those users that have
been assigned to the same area(s) as the Master user. A Master
user cannot delete their own PIN.
Access > Token >
Delete Token
This menu allows a Master user the ability to delete a token for
those users that have been assigned to the same area(s) as the
Master user.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [2] + [1].
A list of users will display on the keypad.
2. Use the [] and [] keys to select the user who's token you
want to delete, then press [OK] to select.
U001 JOHN SMITH
U002 DEBBIE SMITH
U003 USER 3 NAME
Press
3. When prompted press the [OK] key to confirm token
deletion.
Access > Token >
Token Status
This menu allows a Master user the ability to identify a token
which has been programmed into the system. Only tokens that
have been assigned to the same area(s) as the Master user cn be
identified.
Bosch Security Systems 03/10 BLCC100U
MENU 1-2-0
, OK or MENU
MENU 1-2-1
, OK or MENU
MENU 1-2-2
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [2] + [2].
The system will prompt you to present the token to the
keypad.
2. Once the token is presented the system will display the
owner of the token.
Token belongs to ur002
DEBBIE SMITH
Press OK or MENU
RF Keyfob
This section outlines how to add and delete RF keyfobs that
allow an alternate method for users to turn an area(s) on and off.
The RF Keyfob must be compatible with the RF Receiver that has
been installed by the security company.
Access > RF Keyfob >
Add Keyfob
This menu allows the security installer or a master user to
program the user's keyfob ID number.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [1] + [3] + [0].
A list of users will display on the keypad.
U001 JOHN SMITH
U002 DEBBIE SMITH
U003 USER 3 NAME
PRESS
2. Use the [] and [] keys to select the user that you
want to add the RF keyfob ID, then press [OK] to select.
Alternatively, you can enter the user number you, then
press [OK].
The keypad will prompt you to enter the RF keyfob ID
number:
Enter keyfob RFid for
U016 User 16 Name
000000000
Press OK or MENU
3. Enter the RF Keyfob ID Number
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Solution16
Plus
MENU 1-3-0
, OK or MENU
User Guide
11