Table of Contents
Advertisement
AT-8324SX Fast Ethernet Switch
The AT-8324SX Fast Ethernet Switch features 24 10BASE-T/100BASE-TX
ports with RJ-45 connectors. Each port supports connection to a 10 Mbps
Ethernet or 100 Mbps Fast Ethernet device and features full- or half-duplex
operation. The switch also has the following three expansion slots on the rear
panel:
The upper expansion slot is for the optional AT-BMGMT Management
Module, which adds SNMP/RMON management to the switch.
The lower right slot can accommodate one of several media expansion
modules, such as the AT-B15/SX module. These modules can be used
to build a high-speed backbone or to provide a dedicated connection to
a network device, such as a network server.
The lower left expansion slot can be used for a media expansion
module or the AT-BSTACK1 Stacking Module, which you can use to
build a switch stack.
For information on site requirements, switch stacks, cabling
specifications, network topologies, and other installation
information, refer to the AT-8324SX Fast Ethernet Switch
Installation Guide. This guide is available from the Allied Telesyn
web site at www.alliedtelesyn.com.
Note
1
Advertisement
Table of Contents
