Table of Contents
Advertisement
Standards: This product meets the following standards:
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with this
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or
the FCC, can void your right to operate this equipment.
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.
1
RFI Emission
2
WARNING: In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
3
Immunity
4
Electrical Safety
SAFETY
5
WARNING: Class 1 Laser product.
6
WARNING: Do not stare into the laser beam.
7
ELECTRICAL NOTICES
WARNING: ELECTRIC SHOCK HAZAR
To prevent ELECTRIC shock, do not remove the cover. No user-serviceable parts
inside. This unit contains HAZARDOUS VOLTAGES and should only be opened by a
trained and qualified technician. To avoid the possibility of ELECTRIC SHOCK,
disconnect electric power to the product before connecting or disconnecting the LAN
cables.
8
LIGHTNING DANGER
DANGER: DO NOT WORK on equipment or CABLES during periods of
LIGHTNING ACTIVITY.
9
CAUTION: POWER CORD IS USED AS A DISCONNECTION DEVICE. TO DE-
ENERGIZE EQUIPMENT, disconnect the power cord.
10
U.S. Federal Communications Commission
Industry Canada
EN55022 (1998)/CISPR-22 (1995) Class A
EN60555-2 (1995) Class A
EN60555-3
IEC 1000-4-2 (4 kV CD, 8 kV AD)
IEC 1000-4-3 (1995) (3 V/m)
IEC 1000-4-4 (1995) (1.0 kV - (power line);
0.5 kV - (signal line))
IEC 1000-4-6 (1995) (3 Vrms)
EN50082-1 (1992)
EN61000-4-2 (1995)
EN61000-4-4 (1995)
CSA/NRTL (CSA 22.2.950& UL 1950)
EN60950 (TUV/GS)
D
Advertisement
Table of Contents
