3
Registering/editing/deleting the secondary recipient
1
Perform steps 1 through 4 of the procedure in "To program a one-
touch dial button".
2
Touch the one-touch dial button to be programmed with a secondary
recipient.
3
Touch [One-Touch], and then touch
[Sub Address Registration].
4
Enter the information for the
secondary recipient, and then touch
[Enter].
–
If a secondary destination is
already registered, check the
settings that appear, and then
touch [Change Settings] or
[Delete].
–
When deleting, a confirmation
message appears. Touch [Yes].
5
Touch [Enter] in each screen until the initial screen appears.
3-36
IP address faxing
bizhub 350/250 (Phase 2.5)