Table of Contents
Advertisement
Specifying management settings
4
Touch the button for the number
where the relay station is to be
registered.
5
Touch [IP Relay Address].
6
Type in the IP address of the relay
station.
–
To register the relay station by its
host name, touch [Host Name],
and then type in the host name.
[Host Name] appears only if
"DNS Settings" is set to "YES".
7
To change the port number, touch
[Port], and then type in the desired
port number.
8
Touch [Enter].
bizhub 350/250 (Phase 2.5)
8
8-7
Advertisement
Table of Contents
