Table of Contents
Advertisement
3
4
Using the keypad, type in the number
of the one-touch dial button.
–
The specified one-touch dial
button is highlighted.
–
Multiple recipients can be
specified for simultaneous
transmission with the same one-
touch dial button. A maximum of
300 recipients can be specified
with a single one-touch dial button.
–
If software switch settings were specified to prevent broadcast
transmissions, a fax cannot be sent to multiple recipients. For
details on the software switch settings, refer to "Specifying
software switch settings (machine functions)" on page 8-11.
5
Specify the appropriate settings on
the Quality & Reduction tab
according to the document to be
sent.
–
For details, refer to "Specifying
the scanning quality and zoom
ratio" on page 3-12.
6
Specify the necessary settings on
the Menu tab.
–
If the optional fax kit has been
installed, specify the necessary
settings on the FAX Menu tab.
–
For details, refer to "Specifying
additional functions" on
page 3-16.
7
Press the [Start] key.
3-6
IP address faxing
bizhub 350/250 (Phase 2.5)
Advertisement
Table of Contents
