1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. All in One Printer
  5. SC-215
  6. User manual

Konica Minolta SC-215 User Manual

Scanner/copier
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SC-215
User's Manual
(D/N: 250-0369-E Version 2.0)
P/N: 1800744-001A

Advertisement

Table of Contents
loading

Related Manuals for Konica Minolta SC-215

Summary of Contents for Konica Minolta SC-215

  • Page 1 SC-215 User's Manual (D/N: 250-0369-E Version 2.0) P/N: 1800744-001A...
  • Page 2 Trademarks Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows and MS-DOS are trademarks of Microsoft Corporation. DOS is never used in the manual. IBM, PC, AT, XT are registered trademarks of International Business Machines Corp. AT and XT are never used in the manual. Other brands and product names herein are trademarks or registered trademarks of their respective holders.
  • Page 3 FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 4: Table Of Contents

    Making Simple Copies Making Copies with Copy Features USING THE SC-215 AS A SCANNER...4-1 Installation Procedures Downloading a printer color table To Customize Color Tables on THE SC-215 Uninstall the SC-215 driver SCANNER OPERATION AND DOCUMENT PRINTING...5-1 USER INTERFACE ...6-1...
  • Page 5 Your First Photo Scan with PhotoSuite 6.21 Your First OCR Scan with TextBridge 6.22 Printing MAINTENANCE ...7-1 SC-215 AUTOMATIC DOCUMENT FEEDER (ADF)..8-1 Installing the ADF Using the ADF Maintaining the ADF Clearing a Paper Jam TROUBLE SHOOTING ...9-1 Questions and Answers Technical Support...

  • Page 6: Introduction

    Please spend a few minutes reading through them to ensure quality copying and scanning. Figure 1-1 shows how the SC-215 is packed. Please check all the items against Figure 1-1. If anything is missing or damaged, please contact your vendor immediately for replacement.
  • Page 7 Utilities & Documentation CD Power Adapter/Cord Parallel Cable for Computer Connection Parallel Cable for Printer Connection USB Cable SC-215 Figure 1-1 SC-215 Packing...

  • Page 8: Sc-215 Installation

    Keep the SC-215 out of direct sunlight. Direct exposure to the sun or excessive heat may cause damage to the unit. Ÿ Do not install the SC-215 in a humid or dusty place. Ÿ Be sure to use the proper AC power source. Ÿ...

  • Page 9: Unlocking The Sc-215

    SC-215 is designed with a lock switch beneath the main unit. Therefore, before using the SC-215, it is required that you unlock the SC-215 by moving the lock switch to the Use position. (See Figure 2-1.) 1. “Shipping” Position 2. “Use” Position...

  • Page 10: Connecting The Cable

    CONNECTING THE CABLE 2.3.1 CONNECTING THE SC-215 TO A PRINTER TO USE AS A COPIER Connect the power cord and printer cable as shown below. Printer Cable To Printer Figure 2-2 Connecting the SC-215 to a printer Note: Only use the AC adapter (SA60-24 made by Sino America) included in the machine.
  • Page 11 2.3.2 CONNECTING THE SC-215 TO A WINDOWS WORKSTATION TO USE AS A SCANNER Connect the power cord and USB cable as shown below. Figure 2-3 SC-215 Cable Connection To PC USB Port USB Cable Power Cord To Power Outlet...

  • Page 12: Document Placement

    DOCUMENT PLACEMENT As shown+ in Figure 2-4, place the document on the glass face (text) down. Figure 2.4 Document Placement Document Cover Home Position Mark Document Document Glass...

  • Page 13: Using The Sc-215 As A Copier

    Using the SC-215 As a Copier To use the SC-215 as a copier, it is recommended that you follow these tips: To use other settings than the one displayed in the Message Display window, simply press the button again for that setting to select other options.

  • Page 14: Connectivity

    If there is not enough memory in your printer, you may probably encounter the following problems: The printer may be unable to print the job. The print quality may not be desirable. CONNECTIVITY The SC-215 has a built-in parallel port, which supports the following printers and features: magicolor magicolor 2200/2210/...
  • Page 15 Notes: Bolded options are the default settings. N/A= Not Available * Some options require that additional accessories to be added to the printer to function. ** If your SC-215 has an automatic document Feeder (ADF), these options are operational. None None...

  • Page 16: The Control Panel

    THE CONTROL PANEL Contrast: Used to adjust the copied /scanned image contrast. Increase the level of color contrast with the ( ) button. Decrease the level of color contrast with the ( ) button. Light/Dark: Lighten or darken your image. Increase the level of brightness or darkness with the ( ) button.
  • Page 18 10. Select: Press to determine a printer to be used after updating the printer setting with the Menu button. (Note: It is not necessary to press the Select button for other settings on the Menu button.) 11. Copy Count: Choose the number of copies from 1 to 99. Increase the value of the numeric entries by the ( ( ) button.

  • Page 19: Before Making Copies

    BEFORE MAKING COPIES The SC-215 supports multiple paper sizes from A4/letter to legal on the flatbed and through the Automatic Document Feeder (ADF). The SC-215 also supports enlarging a copy (from letter/legal/A4) to larger sizes (such as A3 and ledger) based upon the printer selected.

  • Page 20: Making Simple Copies

    MAKING SIMPLE COPIES Procedure: 1. Place your original face-down on the document glass. 2. Press the Copy button (either Color or Black and White).The Message Window displays “Copying… ”, and the Ready LED flashes. 3. Within a few moments, the copying is done. The Message Window then displays “1 Copy @100%”...

  • Page 21: Making Copies With Copy Features

    MAKING COPIES WITH COPY FEATURES 3.5.1 MIRROR FUNCTION This function allows you to flip the copied image horizontally as if the image were reflected in a mirror. Procedure: Place your document face-down on the document glass. Press the Menu button until the message “Mirror: off” appears.
  • Page 22 3.5.2 ENLARGING OR REDUCING YOUR ORIGINAL Like most copiers, the SC-215 also features an enlargement/reduction function to resize your original. Procedure: Place your document face-down on the document glass. Press the “Reduce/Enlarge” button. The Message Window displays “Ratio:100%.” Press the button again to see more options. For example, if you need 150% enlargement, select “141%”...
  • Page 23 3.5.3 CHANGING COPY DENSITY Copy density refers to the degree of darkness that the SC- 215 has reproduced. Use the density feature to compensate for an unsatisfactory original. Procedure: Place your original face-down on the document glass. Press the “Lighter/Darker” button. The Message Window displays the default degree of darkness.
  • Page 24 3.5.5 CHOOSING COPY QUANTITY Procedure: Place your original face-down on the document glass. The default copy count is 1. If you need to make 3 copies, for example, press the “Copy Count” button and the Message Window displays “2 copy @100%.” 3.
  • Page 25 Message Window displays “Quality mode.” Press the Copy button. The copying begins processing with the Quality mode. See the following photo/text reproduction comparison between a normal copier and the SC-215 in quality mode. Make copies with a normal copier Note:...
  • Page 26 3.5.7 ORIGINAL CONTENT MIXED/TEXT/PHOTO COPIES Content can vary widely. The SC-215 can be configured to maximize the copy operation based upon the content of the original. If the original is a photograph or a document that contains photographic images with minimal text, select the Photo function to get the best desired output.
  • Page 27 Window displays “Normal mode.” Press the “Normal/Quality” button again and the Message Window displays “Quality mode.” Press the Copy button. Your 3D object copy is done. The 3D copy using a normal copier The 3D copy using the SC-215 3-15...
  • Page 28 Control Panel. The Message Window displays “Warming up… ” and then “1 Copy @100%,” the ready status. The Ready LED now turns on. The SC-215 can also have the power saving mode disabled entirely. To change the SC-215 power saving mode, press the Menu button and select Sleep.

  • Page 29: Using The Sc-215 As A Scanner

    Using the SC-215 as a Scanner To operate the SC-215 at optimum speed as a scanner, the following minimum requirements are recommended: IBM compatible PC (Pentium or greater) Microsoft Windows 98/Me, Windows 2000,Windows XP One USB port available 100 Megabytes of available hard disk space for installation...

  • Page 30: Installation Procedures

    INSTALLATION PROCEDURES Installation procedures for the SC-215 driver and utilities are as follows: Insert the Utilities and Documentation CD-ROM into your PC’ s CD-ROM drive. The CD-ROM will auto launch on most systems. However, if it does not, from the Start button, choose RUN, type x:\driver\setup.exe (x: the CD-ROM drive in use), and...

  • Page 31: Downloading A Printer Color Table

    PC: 1). Turn off the SC-215 and your PC. 2). Connect the SC-215 to your PC by plugging one end of the supplied USB cable into the USB port of the SC-215 and the other end into the USB port of your PC.
  • Page 32 5). Follow the instructions on the screen to complete installation of the Download Utility and importing all printer color table files to your PC. When all of these installation steps are finished, the SC-215 Download Utility screen pops up, as shown below. Fig. 4.4...

  • Page 33: To Customize Color Tables On The Sc-215

    TO CUSTOMIZE COLOR TABLES ON THE SC-215 1). Choose Start>Programs> SC-215 Download Utility> SC- 215 Download Utility. The SC-215 Download Utility screen appears as below. 2). Choose the brand name and model name of your new printer on the left side and click the "Add" button to move...
  • Page 34 When the status bar shows 100%, this means you have successfully downloaded the color table to the SC-215. 6). Connect the SC-215 to your printer and turn on the printer. On the Control Panel of your SC-215, press the ”Menu”...

  • Page 35: 4.4 Uninstall The Sc-215 Driver

    Updating the SC-215’s firmware: From time to time, the SC-215 will be upgraded to have a greater compatibility range, such as supporting more printers, including a variety of color tables. Therefore, downloading your SC-215’ s firmware occasionally from our website (http://euro.konicaminolta.net/...

  • Page 36: Scanner Operation And Document Printing

    TWAIN link is used. A dialog box with a list of scanning sources appears. Select SC-215/32Vx.xx. You need to select the source only once, unless you want to choose another scanner.
  • Page 37 Select the scanning method you want to use in the Scan Method drop-down menu. Select the mode you want to use for your scans in the Image Type drop-down menu. Select a scanning resolution in the Resolution drop- down menu. Select the settings for the scanning features (for example, Sharpen, Descreen, etc.) that you want to use.

  • Page 38: User Interface

    User Interface SCAN METHOD Select how you want to scan in the Scan Method drop- down menu. Simplex/One-page— Use this setting if you are using the automatic document feeder (ADF) to scan one single-page document at a time. Simplex/Multi-page— Use this setting if you are using the automatic document feeder (ADF) to scan batches of single- page documents at a time.

  • Page 39: Determining The Resolution

    DETERMINING THE RESOLUTION Good control of the resolution results in satisfactory detail of a scanned image. The resolution is measured by dots per inch (dpi). Normally, the greater the dpi number, the higher the resolution and the larger the image file size. Be aware that greater resolution takes more time, memory, and disk space;...
  • Page 40 True Color mode. 2. You can also refer to the following table to choose a proper resolution for your image. Scanner Settings Application File, Fax, E-mail Your Document View, Copy, Edit Your...

  • Page 41: Selecting The Proper Image Type

    SELECTING THE PROPER IMAGE TYPE Select the appropriate image type from the scanner user interface for your specific document. The following image types are available: Line art (Black and White) LineArt presents the image in black and white only, and there are no intermediate shades of gray in between.
  • Page 42 Halftone Halftone simulates grayscale by using different size dots. Particularly when you view the image at a certain distance, it looks very much like a grayscale image, yet it consumes less disk space. The pictures that we usually see in newspapers or magazines are halftones.
  • Page 43 8-Bit Gray A single-channel image consists of at least 256 shades of gray. An 8-bit scanner produces a grayscale image with 1024 shades of gray between pure black and pure white. Choose this option if you are scanning black-and-white photographs.
  • Page 44 8-Bit Color A 8-Bit Color image provides 256 color hues in the image. The file size of a 256 color image is 1/3 the size of a 24-Bit Color image. 8-Bit Color Image 24-Bit Color A 24-Bit Color image consists of three 8-bit color channels. The red, green, and blue channels are mixed together to create a combination of one billion colors which give a more true-to-life quality to the image.

  • Page 45: Brightness

    BRIGHTNESS Click on the Brightness button to adjust the lightness or darkness of an image. The higher the value, the brighter the image. Decrease your brightness Normal Increase your brightness...

  • Page 46: Contrast

    CONTRAST Click on the Contrast button to adjust the range between the darkest and the lightest shades in the image. The higher the contrast, the bigger the difference in grayscales. Decrease your Normal contrast Increase your Contrast...

  • Page 47: Invert Image

    INVERT IMAGE Click on the Invert Image button to reverse the brightness and color in the image. For color images, each pixel will be changed into its complementary color. Original After Invert 6-10...

  • Page 48: Mirror

    MIRROR Click on the Mirror button to reverse the image (create a mirror image). Mirror function is off PREVIEW AUTO-AREA Click on the Preview Auto-Area button to automatically crop the preview scan area to the previewed document. This will then be the cropping area for all of the scanned documents. Mirror function is on 6-11...

  • Page 49: Paper Size

    PAPER SIZE Click on the Paper Size button to select a scan size from the list of frequently used scan sizes. 6.10 UNITS Click on the Units button to indicate the measuring system that is in use (Inch, cm, or Pixel). 6-12...

  • Page 50: Descreen

    6.11 DESCREEN Click on the Descreen button to access a drop-down menu that allows you to specify the type of document you are scanning in order to eliminate the moiré pattern* commonly found in printed matter. You can specify Newspaper, Magazine, or Catalog.

  • Page 51: Color Adjustment

    6.13 COLOR ADJUSTMENT Click on the Color Adjustment button to enable the button for the Hue, Saturation, and Lightness feature. NOTE: The Advanced Settings button must be enabled in order to use the Hue, Saturation, and Lightness feature. 6.14 AUTO LEVEL Click on the Auto Level button to add shadow to reveal more details in an image.
  • Page 52 Highlight / Shadow This feature is available when 8-Bit Gray, 8-Bit Color, or 24-Bit Color is selected in the Image Type drop-down menu. Highlight refers to the lightest point in a scanned image; shadow refers to the darkest point. Click on the Highlight / Shadow button to access the Highlight / Shadow Levels dialog box.
  • Page 53 Curves When you select the Curves button, a dialog box appears that allows you to adjust the midtone of the image without losing details in the lightest and darkest areas. Select the Curve or Line button, depending on whether you want a curved or an angled setting.
  • Page 54 Color Balance When you select the Color Balance button, a dialog box appears that allows you to adjust the color of the image so that it comes close to that of the original. The default parameters are used to adjust the image. You can type values in the Color Levels text boxes or you can drag the sliding arrow under the color.
  • Page 55 Hue /Saturation /Lightness Click on this button to adjust the hue, saturation, and lightness of an image. This button is enabled when the Color Adjustment button is selected. You can type values in the text boxes or you can drag the sliding arrow beneath each item.
  • Page 56 Color Drop-out This feature is available when Black and White, Halftone, or 8-Bit Gray is selected on the Image Type drop-down menu. Click on the Color Drop-out button to access a dialog box that allows you to choose to remove the R (Red), G (Green), or B (Blue) color channel while scanning.

  • Page 57: Custom Settings

    6.15.1 CUSTOM SETTINGS Click on the Custom Settings button to access a dialog box where you can save your scan settings and configuration settings. There are two tabs: Scan Settings and Configuration Settings. Scan Settings The Scan Settings tab allows you to save your scanning feature settings in a file, load an existing file, or delete an existing file.
  • Page 58 Deleting a scan settings file Right-click on a file name and press the Delete button on the computer keyboard to delete the file. Configuration Settings The Configuration Settings tab allows you to customize some special settings. Energy Saving Mode— check the Enable box to enable energy savings.

  • Page 59: Miscellaneous

    The scale value automatically changes when you apply this option and simultaneously resize the selected area. Information Click on the Information button to access a window that gives you info rmation about the scanner and driver. 6-22...
  • Page 60 Preview: Click on the Preview button to scan a document so you can review the scanned image. This allows you to specify an area to be scanned and any scanning feature settings to be used for future scans. When a scanning feature is changed and applied, the Preview image is updated for a real-time view of the change.

  • Page 61: Working With Quick Selector

    6.17 WORKING WITH QUICK SELECTOR Quick Selector: Using Quick Selector, you can instantly scan and link your scanned image to one of selected applications without going through a number of time-consuming steps (For example, you don’ t need to start the application first, then select TWAIN source, choose “acquire”...
  • Page 62 6.17.1 STARTING QUICK SELECTOR The Quick Selector main window is displayed. Quick Selector main window Function Description Copy: The Copy button allows you to print your scanned image. Fax: The Fax button allows you to fax your scanned image to your correspondent.
  • Page 63 You can paste the scanned image to your homepage. Setup: The Setup button allows you to customize your application and SC-215 settings to suit your own needs. Help: The Help button allows you to view the on-line help to learn how to use the Quick Selector.
  • Page 64 SC-215 settings when you want to use different paper size, resolution, image type and so on. The following is an example on how to Set-up your Fax in Quick Selector.
  • Page 65 The Fax icon button 3. Select your Fax software location in Application setting area of the dialog. 4. Select your Resolution, Paper Size, or Image Type in the SC-215 settings area. 6-28 Application setting area SC-215 settings area...
  • Page 66 6.17.3 USING QUICK SELECTOR Get a Preview image: Click the Preview button in Quick Selector’ s main window to get a rough scan image (low resolution) and to allocate your final scan area. Select your Application: Move your mouse pointer to your desired application.

  • Page 67: Your First Scan With Papercom

    6.18 YOUR FIRST SCAN WITH PAPERCOM Welcome to PaperCom: a filing cabinet by your desktop. With PaperCom, you can keep your photos, newspaper clippings, doctor’ s bill, business cards or legal contract electronically. Above all, you can link your documents to various applications such as fax, e-mail, image-editing, or OCR with the click of a button.

  • Page 68: The Scan Button

    Place your image on the document glass of the SC-215 and click the Scan button to start your first scan with PaperCom. Click “Preference” on the File menu to change SC-215 setting. Add new folder by choosing File >New Folder- >(Type folder...
  • Page 69 SC-215 Settings in the “Setup” dialog. Select one of the Application icon to change the SC-215 setting and designate the location of your application. Select proper SC-215 source if you have more than one SC-215. 6-32 Click “Apply” button to save all...

  • Page 70: Working With The Bundled Applications

    6.19 WORKING WITH THE BUNDLED APPLICATIONS If you want to work with various bundled software applications individually without starting Quick Selector, you can launch each of the bundled applications through the Programs group from the Start menu. For further details on the bundled software applications, view the manual for each application on the Utilties and Documentation CD-ROM, under the “Manual”...
  • Page 71 (color matching, descreen, etc.) 4. Open the SC-215 document cover, place a picture or a document face down on the glass of the SC-215. 5. Click on “PREVIEW”. The SC-215 will scan your image for preview on screen.

  • Page 72: Your First Ocr Scan With Textbridge

    Place a document in your SC-215. Click the “Auto” button dialog box will show up. Click the Preview button. The SC-215 will scan your image for preview on the screen. Select the scanning area, set Line Art ( ), 300dpi (resolution) and click the Scan button.
  • Page 73 6-36...

  • Page 74: Printing

    Figure 6.1 SC-215 Cable Connection Caution: The image scanned to a PC through the SC-215’ s USB port can be printed on a printer connected to the SC-215 under the condition that the SC-215’ s PC parallel port is connected to the PC’...

  • Page 75: Maintenance

    Moisten a soft clean cloth with isopropyl alcohol (95%). Gently wipe the document glass and the white sheet beneath the document cover to remove the dust or any toner particles. Close the document cover. The SC-215 is now ready for use. 1. Document Cover 2. Document Glass...

  • Page 76: Sc-215 Automatic Document Feeder (Adf)

    SC-215 Automatic Document Feeder (ADF) The SC-215 Automatic Document Feeder (ADF) is a convenient addition to your current SC-215. With the ADF, you can automatically copy or scan up to 25 pages at a time. INSTALLING THE ADF 8.1.1 UNPACKING THE ADF...
  • Page 77 8.1.2 INSTALLING THE ADF Turn off your SC-215. Lock the scanning unit on the back. Disconnect the power cable. Remove the document cover by opening the cover and lifting the studs from the hinge holes at the rear of the SC- 215.
  • Page 78 Insert the notched corners of the ADF Paper Support to the clip-joints on the ADF Paper Tray. Insert the notched corners of the ADF Paper Tray into the clip-joints on the ADF document cover. Paper Tray Paper Support...
  • Page 79 8.1.3 UNLOCKING THE SC-215 Slide the Lock Switch on the bottom of the SC-215 to unlock the scanning unit. 1. “Shipping” Position 2. “Use” Position...
  • Page 80 8.1.4 CONNECTING THE CABLES 8.1.4.1 Connecting the SC-215 to Work as a Copier Connect the ADF cable, the power cable, and the printer cable (not included), respectively. Printer Cable To Printer ADF Cable To Power Outlet Power Cable...
  • Page 81 8.1.4.2 Connecting the SC-215 to Work as a Scanner Connect the ADF cable, the power cable, the included USB cable for connection to the PC, and the included parallel printer cable respectively. Parallel Cable Printer Cable To Printer To PC...

  • Page 82: Using The Adf

    USING THE ADF 8.2.1 FANNING PAPER BEFORE USE To prevent occasional paper jams when automatically feeding multi-page documents, fan the paper before loading. Paper which cannot be properly fed by the ADF: Paper with clip or staple attached Paper with ink not totally dry Paper with inconsistent thickness, such as envelopes Paper with wrinkles, curls, folds or tears Coated paper...
  • Page 83 After the installation of the ADF unit is completed and you have properly placed your document on the ADF Paper Tray, press the Copy button on the Control Panel of SC-215. To apply copy features displayed on the Control Panel, please refer to the previous section, Making Copies with Copy Features (Section 3.4).
  • Page 84 Choose Acquire from the File menu, click Select TWAIN Source, and select SC-215 V.X.xx. (The command to open the TWAIN source may vary due to different applications. Please refer to the user manual of your TWAIN application.) In a minute, the TWAIN window will be displayed.
  • Page 85 Press the Source button to switch the scanning source to Simplex/Multi-page at the TWAIN window. Press the Preview button to get an initial scanned image at a low resolution to allocate your selected scan area. Open the ADF document cover to take out the document and then position it on the first page of the document on the ADF Paper Tray.

  • Page 86: Maintaining The Adf

    From time to time the pad assembly and feeding rollers may become contaminated with ink, toner particles or paper dust. In this case the SC-215 may not feed documents smoothly. If this occurs, please follow the cleaning procedures to return your scanner to its original state.
  • Page 87 3. Wipe the pad from top to bottom. Be careful not to hook the pick springs. 4. Close the ADF unit. Your SC-215 is now ready for use. ADF Pad Feeding Roller 8-12...
  • Page 88 8.3.2 REPLACING THE ADF SNAP-IN PAD MODULE After scanning approximately 20,000 pages through the ADF, the pad may be worn out and you may experience problems with document feeding. In this case, it is highly recommended that you replace the pad module with a new one. To order a pad module, please consult your nearest dealer and follow the procedure below to replace it.
  • Page 89 Press both arms of the ADF snap-in pad module inwardly with your two fingers to pull out the ADF snap-in pad module. ADF Pad 8-14...
  • Page 90 Assembly Procedure Take the new ADF pad module out of its box. Press both arms of the ADF snap-in pad module inwardly with your two fingers. Place it into the holes until it snaps into place. 8-15...

  • Page 91: Clearing A Paper Jam

    In the event of a paper jam, follow the procedure below to remove the jammed paper: 1. Turn the SC-215 off by disconnecting the power cable. 2. Gently open the ADF front cover to the left. 3. Carefully pull the paper out of the ADF unit.

  • Page 92: Troubleshooting

    Question: Why does not my GDI printer work with the SC-215? Answer: Disable the Auto Scan function in the application, and then your printer will function...
  • Page 93 SC-215 currently uses. It is suggested that you use other parallel ports to connect these devices. For instance, you can connect the SC-215 to LPT1, and connect other parallel port devices to LPT2.
  • Page 94 Question: How are a ZIP drive and an SC-215 connected through a single parallel port? Answer: Use the Zip drive cable to connect the Zip drive to your PC’ s parallel port. Plug the male connector of the supplied SC-215 cable to the Zip drive’...
  • Page 95 Therefore, if you want to print color and require high quality, it is highly recommended to have adequate memory within the printer. SC-215 Settings (when used as a scanner) SC-215 Settings Application File, Fax, E-mail Your Document...

  • Page 96: Technical Support

    TECHNICAL SUPPORT Technical support for the SC-215 scanner is provided at the KONICA MINOLTA Technical Support Centers. Before you contact us, please prepare the following information for a quick solution: Ÿ Scanner serial and revision number (located on the bottom of the scanner) Ÿ...

  • Page 97: 10. Specifications

    10. Specifications Optical Resolution 600x600dpi Enhanced Resolution 9600x9600dpi Copy Area Copy Features Printers Supported magicolor 2200 (resident) Scan Interface Printer Interface Power Source Power Consumption < 20 W Physical Dimensions Flatbed unit: 476 x 356 x 91 mm Maximum 215 x 355 mm/8.5"x 14.0" (Legal size) Zooming from 25%~400% Auto Zooming...
  • Page 98 Weight Speed Paper tray capacity 25 pages Document size (Legal size) Document thickness Flatbed unit: 4.3 kg (9.5 lbs) ADF unit: 1.4 kg (3.1 lbs) 10 PPM (page per minute) (mono mode) Maximum: 215 x 355 mm/8.5"x 14.0" Minimum: 114 x 140 mm/4.5” x 5.5” .07 mm ~ .15 mm/ 0.002”...
  • Page 99 Model Number : conforms to the following Product Specifications: Emission: Immunity: Avision, Inc. No. 20, Creation Road I, Hsinchu Science Park, Hsinchu, Taiwan SC-215 EN 50081-1 EN 55022 EN 61000-3-2 EN 61000-3-3 EN 55024 IEC 61000-4-2 IEC 61000-4-3...

Table of Contents