Scanner Unit Does Not Close - Lexmark 101 User Manual

Pro700 series
Hide thumbs Also See for 101:
Table of Contents

Advertisement

"Poor copy or scanned image quality" on page 137
"Partial copies or scans of documents or photos" on page 137
"Scan was not successful" on page 138
"Scanning takes too long or freezes the computer" on page 138
"Cannot scan to a computer over a network" on page 138
Copier or scanner does not respond
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
S
ET YOUR PRINTER AS THE DEFAULT PRINTER
R
EMOVE AND REINSTALL THE PRINTER SOFTWARE

Scanner unit does not close

1
Lift the scanner unit.
2
Remove any obstruction keeping the scanner unit open.
3
Lower the scanner unit.
Poor copy or scanned image quality
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
C
LEAN THE SCANNER GLASS
A
DJUST THE SCAN QUALITY FROM THE PRINTER SOFTWARE
R
EVIEW THE TIPS FOR COPYING
U
SE A CLEARER VERSION OF THE ORIGINAL DOCUMENT OR IMAGE
M
AKE SURE THE DOCUMENT OR PHOTO IS LOADED FACEDOWN ON THE SCANNER GLASS AND IN
THE CORRECT CORNER
Partial copies or scans of documents or photos
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
M
AKE SURE THE DOCUMENT OR PHOTO IS LOADED FACEDOWN ON THE SCANNER GLASS AND IN
THE CORRECT CORNER
,
,
SCANNING
AND IMPROVING PRINT QUALITY
Troubleshooting
137

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

10ePro700 series

Table of Contents