Printing > Using a Job Box
Proof and Hold Print Box
Proof and Hold box stores the print data which is printed by using the printer driver as a Proof and Hold Print job.
Refer to the Printer Driver Operation Guide on how to print a job as Proof and Hold Print job using the printer driver.
NOTE
RAM disk mode must be enabled. RAM disk mode can be used when optional memory has been installed.
For details, refer to RAM Disk Setting on page 9-21.
Setting the Number of Stored Jobs
To maintain free space on the
1
2
isk, you can set the maximum number of stored jobs.
Display the screen.
1
Enter the maximum number of stored jobs.
1
You can enter any number between 0 and 50.
NOTE
If you enter a value of 0 (zero), you cannot use the Proof and Hold function.
2
2
5-6
3
4