Kyocera FS-6025MFP/B Operation Manual page 310

Troubleshooting > Responding to Error Messages
Error Message
Finisher failure.
Finisher tray is full of paper.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
H
Error Message
High temperature. Adjust room
temp.
I
Error Message
Incorrect account ID.*
Incorrect Login User Name or
Password.*
Inner tray is full of paper.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
J
Error Message
Job Accounting restriction
exceeded.*
Job separator tray is full of paper.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
—
Is the acceptable storage
capacity exceeded for the
document finisher tray?
Checkpoints
—
Checkpoints
—
—
—
Checkpoints
Is the acceptable printing count
restricted by Job Accounting
exceeded?
Is the maximum capacity of the
job separator exceeded?
10-14
Corrective Actions
Contact your Service Representative.
Press the System Menu/Counter key,
[Adjustment/Maintenance], [Service
Setting] and then [Reset Disable
Function Mode]. Press [Execute] to
perform Reset Disable Function Mode.
Remove paper from the document
finisher tray.
Corrective Actions
Adjust the temperature and the humidity
of your room.
Corrective Actions
The Account ID does not match. Check
the registered Account ID.
Enter correct login user name or
password.
Remove paper from the inner tray and
press [Continue].
Corrective Actions
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more. This
job is canceled. Press [End].
Take some paper out of the job
separator. Printing then resumes.
Reference
Page
—
—
Reference
Page
1-3
Reference
Page
—
—
—
Reference
Page
—
—