Kyocera FS-6025MFP/B Operation Manual page 63

Preparation before Use > COMMAND CENTER (Settings for E-mail)
3
Item
Login Password
POP before SMTP
Timeout
Test
E-mail Size Limit
Sender Address
Signature
Domain Restriction
Click [Submit].
When Other is selected for Authenticate, the password set here will be
used for authentication. The maximum length of the login password is 64
characters.
Set the amount of time to wait before time-out in seconds when you have
selected POP before SMTP as the Authentication Protocol.
This will test if the SMTP connection can be successfully established.
Enter the maximum size of E-mail that can be sent in kilobytes. When the
value is 0, no maximum size is set.
Enter the E-mail address of the person responsible for the machine, such
as the machine administrator, so that a reply or non-delivery report will go
to a person rather than to the machine. The sender address must be
entered correctly for SMTP authentication. The maximum length of the
sender address is 128 characters.
Enter the signature. The signature is free form text that will appear at the
end of the E-mail body. It is often used for further identification of the
machine. The maximum length of the signature is 512 characters.
Enter the domain names that can be permitted or rejected. The maximum
length of the domain name is 32 characters. You can also specify E-mail
addresses.
2-25
Description