Kyocera FS-6025MFP/B Operation Manual page 311

Troubleshooting > Responding to Error Messages
K
Error Message
KPDL error.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
L
Error Message
Low temperature. Adjust room
temp.
M
Error Message
Machine failure.
Maximum number of scanned
pages.
Memory card error.
Memory is full.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
—
Checkpoints
—
Checkpoints
—
Is the acceptable scanning count
exceeded?
—
—
—
10-15
Corrective Actions
PostScript error has occurred.
The job is canceled. Press [End].
Corrective Actions
Adjust the temperature and the humidity
of your room.
Corrective Actions
Internal error has occurred. Make a note
of the error code displayed on the touch
panel, and contact your Service
Representative.
Only one copy of the scanned pages is
available.
Press [Continue] to print, send or store
the scanned pages.
Press [Cancel] to cancel printing,
sending or storing.
Job is canceled. Press [End].
Unable to continue the job as the
memory is used up.
Press [Continue] to print the scanned
pages. The print job cannot be
processed completely.
Press [Cancel] to cancel the job.
The process cannot be performed due
to insufficient memory. If only [End] is
available, press [End]. The job will be
canceled.
Reference
Page
—
Reference
Page
1-3
Reference
Page
—
—
—
—
—