Kyocera Mita DP-2800 PLUS Instruction Handbook Manual page 170

Chapter 5 Troubleshooting
5-6
Printed Results
The image is smeared.
Faint or blurred printing
Grey background.
Corrective Action
Clean the charger wire
Open the printer's front cover and clean the charger wire
using the green cleaning knob. (See Chapter 4.)
Check the Ecoprint setting. (See Chapter 2.)
Try setting toner control to high density.
(See Chapter 2.)
If the Toner low DP-2800 message is displayed and
the toner indicator is flashing, install a new toner kit.
(See Chapter 4.)
Clean the charger wire
Open the printer's front cover and clean the charger wire
using the green cleaning knob. (See Chapter 4.)
Check the control panel.
If the Toner low DP-2800 message is displayed and
the indicator is flashing, install a new toner kit. (See Chapter
4.)
(Continued on next page)