Service Mode; Executing Service Mode - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

1-4-1 Service mode

The printer is equipped with various service mode that can be accessed with the MENU key operation on the operation
panel.

(1) Executing service mode

Message display
Ready
--- A4 PLAIN
1 Press the MENU key.
Print
Menu Map
Other
Service mode items
To scroll
these items,
press the
or key
repeatedly.
2 Press the or key several times
until Other > is displayed.
> >MSG Language
English
3 Press the ENTER key.
>Service
>>Print
Status Page
>>Print
Event Log
>>Color
Calibration
>>Print
Test Page
>>Maintenance
>>Drum
4 Press the or key several times
until >Service > is displayed.
>
5 Press the
key.
To print a status page for service purpose.
See page 1-4-2.
To print an event log (EVENT LOG).
(*Displayed when FRPO I1 is set to 1.)
See page 1-4-7.
To execute color calibration.
See page 1-4-10.
To print a test page.
See page 1-4-11.
To reset the counter after replacing the maintenance kit.
See page 1-4-12.
To perform drum surface refreshing.
See page 1-4-13.
FS-C5016N
1-4-1