Table of Contents
Advertisement
Feed Selection
Use the FEED key to select whether to feed paper from one of the paper feed cassettes or from the
multi-purpose tray. If optional paper feeders (ST-1000 or EF-100/UF-100) are installed, any of these
can also be selected.
The FEED key can be used whenever the message display indicates Ready or Add paper.
Press the FEED key. The selection cycles and is momentarily displayed in the message display as:
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Cassette 5
Cassette 6
EF/UF
MP tray
The paper size and media type set for the paper source are also displayed in addition to the above
displays.
The cassette indicator corresponding to the selected cassette on the control panel will flash. Selecting
the paper feeder (ST-1000) cassette will also light the ready indicator on the front of that cassette.
Paper feed selections can also be made using the PRESCRIBE 2e PSRC command.
(Paper feeder's top cassette)
(Paper feeder's bottom cassette)
(Displayed when an optional feeder is installed [upper cassette])
(Displayed when an optional feeder is installed [lower cassette])
(Displayed when a second optional feeder is installed [upper
cassette])
(Displayed when a second optional feeder is installed [lower
cassette])
(Displayed when an EF-100 or UF-100 is installed)
(Printer's multi-purpose tray)
Operating Procedures
2-15
Advertisement
Table of Contents
