Table of Contents
Advertisement
Synchronization: There are two options of setting system time
1) Enable NTP:
By selecting Enable NTP, the NP727 can synchronize its system time with the NTP server
automatically. While this method is chosen, at least one NTP server's IP address should be
provided. It is recommended to provide the IP address of both NET Server 1 and 2 in case of any
NTP service failure.
2) Manually set up:
By selecting manually set up, the administrator can manually set the system date and time.
Unless the Internet connection is unavailable, it is recommended to use NTP server for time
synchronization.
NP727 User's Manual V1.00
Advertisement
Table of Contents
Need help?
Do you have a question about the INFRASTRUCTURE SERIES and is the answer not in the manual?