System Configuration; System Information - NetComm INFRASTRUCTURE SERIES User Manual

Infrastucture series in-wall wireless access point
Table of Contents

Advertisement

4.1 System Configuration

This section includes the following functions: System Information, Network Settings and Management
Services.

4.1.1 System Information

System Information
For the purpose of maintenance, it is required to specify the system name, its location and corresponding
basic parameters. Fields such as Name, Description and Location are used for mnemonic purpose. It is
recommended to have different values in each AP.
Name: The system name used to identify this system
Description: Further information about this installation
Location: The geographic location
Time
Synchronize the system time either by using NTP server or by manual setup. When NTP server is used, the
information of at least one NTP server must be provided. If FQDN (full qualified domain name) is used as the
IP address of NTP server, the DNS server must also be activated (please refer to 4.1.2 Network Settings).
Device Time: Current system time
Time Zone: Select a time zone from the drop-down list box
NP727 User's Manual V1.00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INFRASTRUCTURE SERIES and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Np727

Table of Contents