NetComm INFRASTRUCTURE SERIES User Manual page 25

Step 5 (CONT). Check WDS Link Status
Click on the Status button.
Select the Repeater tab.
Check the signal strength of WDS link(s)：
Upon the completion of Step 5, there shall be RSSI displayed on the WDS Link Status. If the RSSI is
shown as N/A, check if the wiring is properly connected and please ensure the accurate execution of
Step 5 as described above.
Congratulations!
The NP727 is now installed and configured successfully.
•
It is strongly recommended to make a backup copy of configuration settings.
•
After the NP727's network configuration is completed, please remember to change the IP Address of
your PC Connection Properties back to its original settings in order to ensure that your PC functions
properly in its real network environments.
NP727 User's Manual V1.00