NetComm INFRASTRUCTURE SERIES User Manual page 17

Infrastucture series in-wall wireless access point

Table of Contents

Please refer to the following steps to complete the basic configuration:

Step 1. Change Administrator's Password:

Click on the Utilities button, and then select the Admin Password tab.

Enter a new password with length up to 32 characters, and then click SAVE to save the new password.

Click SAVE to save the changes, but you must reboot the system upon the completion of all

Note:

configuration settings for the changes to take effect. When clicking SAVE, the following message will

appear: "Some modifications have been saved and will take effect after Reboot."

NP727 User's Manual V1.00

Table of Contents

Need help?

Do you have a question about the INFRASTRUCTURE SERIES and is the answer not in the manual?

Np727