Table of Contents
Advertisement
Step 5. Configure WDS (Wireless Distribution System) Settings
To extend its wireless coverage, the NP727 is capable of creating WDS links for connection to other WDS-capable
APs (peer APs). The NP727 supports up to 4 WDS links; by default, all WDS profiles are disabled.
Click on the Repeater tab.
Select WDS from the drop-down list of Repeater Type.
Configure WDS link parameters:
(a) Select preferred Security Type
(b) Enter MAC Address of Remote AP (peer AP) and click Add
To configure peer AP(s):
After completing the WDS settings for the NP727 (functioning as a "primary WDS station"), you must
also configure the settings of its peer AP(s).
If you use another NP727 as the peer AP, simply repeat the above-mentioned steps with the MAC
Address of the primary WDS station for setting WDS link parameters of the peer AP(s).
NP727 User's Manual V1.00
Advertisement
Table of Contents
Need help?
Do you have a question about the INFRASTRUCTURE SERIES and is the answer not in the manual?