Installation Instructions; Unpack Dish Drawer; Prepare Cabinet Opening - Kenmore 66513342K606 Installation Instructions Manual

INSTALLATION INSTRUCTIONS
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
2. Turn off water supply.
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
1. Read valuable ;nformatlon on exterior of shipping box before
opening.
2. Remove shipping materials, tape and film from the dishwasher.
Remove parts package from inside the dishwasher.
To ensure minimum clearance dimensions exist:
• Measure the distance from the cabinet countertop to the floor and
ensure 333/4" (85.7 cm) minimum height.
• Measure the distance from the front of the cabinet to the back
wall and ensure 24" (61 cm) minimum depth.
• Measure the distance from the left-hand side to the right-hand
side of opening and ensure 24" (61 cm) minimum width.
2. Drill 11/2'' (3.8 cm) diameter holes for drain and water hoses and
electrical wiring as shown. Holes should be placed 1/2" (1.3 cm) from
back wall.
A
(1.3cm)
A. Choose/eft-hand or right-hand water hose route.
B. Choose/eft-hanc/or right-hanc/ e/ectric wire anc/ drain route,
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797, provided
with cord kit).
3. Install mounting brackets 17" (43.2 cm) from floor using screws
provided. If needed, drill 1/8" pilot holes in cabinet.
F
17"
(43,2 cm)
4. Decide which dishwasher-to-counter attachment method will be used.