Step 2: Cabinet Preparation - Thermador P24GE Installation Instructions Manual

Step 2: Cabinet Preparation
FIG. 5 Side View of Cooktop
Low Back required when there is tess than
12" horizontal clearance from back of cooktop
to combustible matedat. With more than 12" of
clearance, the Island Trim may be used.
FIG. 6 Projecting from
Cabinet Front
1=3/8"
Front projects outward 1o3/8" as
shown from standard 24"-deep
base,
FIG. 7 Flush to Cabinet
Front
* Provide clearance for screws by
increasing cutout height by 1/16"
or by notching in the location of
the three screws,
_>" N otch
Depth
Front flush with cabinets;
minimu mof 25=3/8" cabinet
depth required.
HG. 8 mnstaLlation of 48" Cooktop above two
side=by=side Thermador Warming Drawers,
Model No. WD24
Minimum 3/4"
Side View
t 7-W16"
Plywood support "_(19,8 cm)
[
Install additional `2#
wood support along
front edge of cutout
P
3/4" (70 ram) minin
between cutot
1-7/8" ( 4,8cm)
H0riz0ntd Distance Between Cutouts
2-3/4"(7 cm) VerticalDistance
Between Cutouts
(See Side View for Wood Support)