Installation - Thermador P24GE Installation Instructions Manual

Step 6: Backguard Installation
ALow Back backguard must be installed
when there is less than a 12" clearance
between combustibles and back edge of
cooktop. (See Fig. 1 and 5.) For island
installations and other installations with
over 12" clearance, an optional stainless
steel trim channel is available to cover the
backguard mounting flanges. Attach the
backguard before sliding the appliance
into the final installed position. Follow
Steps A through C below:
A. Slide backguard over the two flanges
on the rear of the appliance. Fasten
the front and back with the two screws
(see A, Fig. 12)provided.
B. Fasten the top of the backguard to
the wall with two screws through the
backguard. (See B, Fig. 12.)
C. Place the backguard cap on top and
fasten using the two counter-sink
screws provided. (See C, Fig. 12.)
FIG. 12 Low Back Attachment
C _/
A
®
LOW BACK AND ISLAND TRIM MODEL NUMBERS
Cooktop Size/Type 12" Low Back
24" Griddle PC24LB
24" Wok GP24LBS
30" PC3OLB
36" GPS36LBS
48" GPS48LBS
Island Trim*
PC241T
GP241TS
PC301T
GPS361TS
GPS481TS
*Requires a minimum of 12" horizontal clearance between back of appliance and combustible materials.
12