Table of Contents
Advertisement
2.3
USB Ports (LAN2_USB34, USB56, USB78,
USB910, USB1112)
These ports support Plug & Play and hot swapping for up to 127 external devices.
The USB ports comply with USB specification rev. 2.0. Transmission rates of up to
480 Mbps and fuse protection are supported. The USB interface can be disabled in
the system BIOS setup.
The ASMB-781 is equipped with two or four high-performance 1000 Mbps Ethernet
LANs. They are supported by all major network operating systems. The RJ-45 jacks
on the rear plate provide convenient 1000 Mbps operation.
If all USB ports will be used, USB power is recommended to switch to +5V instead of
+5VSB.
USB 11
USB 12
USB 910
USB 56
USB78
LAN 1/2 LED Indicator
LAN Mode
1 Gbps Link on
100 Mbps Link on
10 Mbps Link on
Active
LAN 3/4 LED Indicator
LAN Mode
1 Gbps Link on
100 Mbps Link on
10 Mbps Link on
Active
LAN2_USB34
LAN1_USB12
LAN Indicator
LED1 Green on (left)
LED1 Orange on (left)
LED1 N/A (left)
LED2 Green flash (right)
LAN Indicator
LED1 Green on (Right)
LED1 Orange on (Right)
LED1 N/A (Right)
LED2 Green flash (left)
15
USB56
USB78
USB910
USB1112
ASMB-781 User Manual
Advertisement
Table of Contents
