Speaker Assembly - HP Compaq 8710p Maintenance And Service Manual

8. Remove the top cover (3).
Reverse this procedure to install the top cover.

Speaker assembly

Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Keyboard (see
c. Switch cover (see
d. Display assembly (see
e. Top cover (see
Remove the speaker assembly:
1. Disconnect the speaker cable (1) from the system board.
Battery on page 46)
Keyboard on page 62)
Switch cover on page
Display assembly on page
Top cover on page 85)
69)
79)
Component replacement procedures
Spare part number
450592-001
87