HP Compaq 8710p Maintenance And Service Manual page 105

8. Fan/heat sink assembly (see
9. Graphics card (see
10. Processor heat sink (see
11. Display assembly (see
12. Top cover (see Top cover on page
13. Speaker assembly (see
14. System board (see
Remove the PC Card assembly:
1. Turn the system board upside down, with the PC Card eject button toward you.
2. Remove the four Phillips PM2.0×4.0 screws that secure the PC Card assembly to the system
board.
3. Remove the PC Card assembly from the system board.
Reverse this procedure to install the PC Card assembly.
Fan/heat sink assembly on page
Graphics card on page
Heat sink on page
Display assembly on page
85)
Speaker assembly on page
System board on page
72)
74)
76)
79)
87)
89)
Component replacement procedures 95