Switch Cover - HP Compaq 8710p Maintenance And Service Manual

Switch cover

Description
Switch cover (includes LED board and cable)
Before removing the switch cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
Remove the switch cover:
1. Turn the computer upside down, with the rear panel toward you.
2. Remove the four Torx T8M2.5×4.0 screws that secure the switch cover to the computer.
3. Turn the computer right-side up, with the front toward you.
4. Open the computer as far as possible.
5. Disconnect the power button board cable (1) from the system board.
Battery on page 46).
Keyboard on page 62).
Spare part number
450479-001
Component replacement procedures 69