Usb/Audio Board - HP Compaq 8710p Maintenance And Service Manual

14. Remove the RJ-45 connector cable (2) from the clips and routing channel built into the base
enclosure.
Reverse the preceding procedure to install the system board, Bluetooth module cable, microphone
extension cable, RJ-11 cable, and RJ-45 cable.

USB/audio board

Description
USB/audio board (includes 2-into-1 USB board cable and audio board cable)
Before removing the USB/audio board, follow these steps:
1. Battery (see
2. Hard drive (see
3. Bluetooth module (see
4. Optical drive (see
5. Keyboard (see
6. TouchPad (see
7. Switch cover (see
8. Fan/heat sink assembly (see
9. Graphics card (see
10. Processor heat sink (see
11. Display assembly (see
12. Top cover (see
Battery on page 46)
Hard drive on page
Bluetooth module on page
Optical drive on page
Keyboard on page 62)
TouchPad on page
Switch cover on page
Fan/heat sink assembly on page
Graphics card on page
Heat sink on page
Display assembly on page
Top cover on page 85)
50)
53)
60)
66)
69)
74)
76)
79)
Component replacement procedures
Spare part number
450483-001
72)
93