Component Replacement Procedures; Serial Number; Computer Feet - HP Compaq 8710p Maintenance And Service Manual

Component replacement procedures

This chapter provides removal and replacement procedures.
There are as many as 97 screws and screw locks, in 18 different sizes, that must be removed,
replaced, or loosened when servicing the computer. Make special note of each screw and screw lock
size and location during removal and replacement.

Serial number

Report the computer serial number to HP when requesting information or ordering spare parts. The
serial number is located on the bottom of the computer.

Computer feet

The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare
part number 450590-001. There are 9 rubber feet, in 4 different sizes, that attach to the base
enclosure in the locations illustrated below.
Component replacement procedures 45