Reformatting The Hard Disk Drive - Epson AcuLaser C8600 Administrator's Manual

The printer is not in the same
segment as the computer
where you installed
EpsonNet WinAssist.
You have not logged in to the
target NetWare server with
supervisor privileges.

Reformatting the Hard Disk Drive

To reformat the Hard Disk Drive, follow the instructions below.
1. Make sure the printer is turned off.
2. Hold down the Down button while you turn on the printer.
3. When you see the message Support Mode on the LCD panel,
select HDD Format in the support menu.
Note:
After reformatting the Hard Disk Drive, the printer will
automatically reboot.
When you want to erase only the fonts installed from the optional
Adobe PostScript 3 (PS3), follow steps 1 through 3 above. Select
PS3 HDD Init when the optional Adobe PostScript 3 ROM is
installed.
When installing a Hard Disk Drive from a different printer,
reformat it with this function.
To search for Internal Print Servers in
other segments, use the Search Options
of EpsonNet WinAssist.
From the computer in which EpsonNet
WinAssist is installed, log in to the target
NetWare server with supervisor
privileges.
Troubleshooting
13
13
13
13
13
13
13
13
13
13
13
13
221