Epson AcuLaser C8600 Administrator's Manual page 55

Note:
If you want to configure a protocol other than TCP/IP, see "Details
of the Configuration Dialog Box" on page 49.
7. Select the "Get IP address" method. If you select Auto, DHCP
becomes available and assigns an IP address automatically. If
you select Manual, you can enter the IP address manually.
Note:
The default is Auto. When Auto is selected, DHCP becomes
available. To use the DHCP server, make sure it is installed on
your computer and configured correctly. See your operating
system's online help for detailed instructions.
EpsonNet WinAssist Configuration Utility
4
4
4
4
4
4
4
4
4
4
4
4
45