Epson AcuLaser C8600 Administrator's Manual page 188

8. Select Enable or Disable for Universal Plug and Play. Select
Enable if you want to use the Universal Plug and Play
function in Windows Me or future operating systems.
9. Change the default Universal Plug and Play device name, if
desired. This device name is used for Windows that supports
the Universal Plug and Play function.
10. Click SUBMIT and enter the password to update the settings.
The same password is required for EpsonNet WinAssist,
MacAssist, and WebAssist. See "Password" on page 202 for
more information on setting the password.
11. If the message "Configuration change is complete!" appears
on your screen, the update is complete. Do not exit the Web
browser and do not send a job to the printer until this message
appears. Follow the on-screen instructions to reset the printer.
Note:
Since the new IP address becomes available after resetting the printer,
you need to restart EpsonNet WebAssist by entering the new IP address.
178 EpsonNet WebAssist