Epson AcuLaser C8600 Administrator's Manual page 200

GL2 emulation
Items
Emulation
GL-Mode
Scale
Origin
Pen
End
Join
Pen (0 to 6)
Set button
Refresh button
ESCP2 and FX Emulation
Items
Emulation
Font
Pitch
Condensed
T. Margin
190 EpsonNet WebAssist
Explanations
Select GL2.
Select whether the emulation is similar to the
GL/2 or the HP LaserJet 4 emulation of the GL/2.
Select whether the output from the software is
scaled, and if so, how the scale factor is
calculated: based on the output paper size of the
software application.
Select whether the logical origin of the "plotter" is
from the corner or the center of the paper.
Select the logical "pen" which "plots" the drawing.
Select the way in which lines end.
Select the way in which lines are joined.
Select the thickness of the seven "pens" used to
make the printout.
Saves any changes.
Clears any changes and reloads the previous
settings.
Explanations
Select ESCP2 or FX.
Select a font which is used for printing.
Select a character pitch.
Use this option to change the character spacing.
Use this option to specify the distance from the
top of the sheet to the baseline of the first
printable line.