Windows Xp - Epson AcuLaser C8600 Administrator's Manual

For printing via NetWare server:
Select Protocol and then click Add. Select Microsoft from the
Manufacturers list and IPX/SPX-compatible Protocols from
the Network Protocols list. Then click OK.
Select Client and then click Add. Select Microsoft from the
Manufacturers list and Client for NetWare Networks from the
Network Clients list. Then click OK.
4. For LPR, Internet, Microsoft Network Shared printing:
Double-click TCP/IP on the Configuration menu to open the
TCP/IP Properties dialog box. Set the IP address, the subnet
mask, etc. and then click OK.
5. Restart the computer.
The necessary components are now installed. Go to "About
EpsonNet WinAssist" on page 41.

Windows XP

For Windows XP, use the following procedure to install the
necessary components.
Note:
The Windows XP CD-ROM may be required during the
installation.
When using TCP/IP or IPP for printing, you need to set the IP
address, the subnet mask, and the default gateway of the computer.
1. Click Start and then Control Panel. Click Network and Internet
Connections, and then select Network Connections.
2. Under LAN or High-Speed Internet, click the Local Area
Connection icon.
30 Installing Components on Your Computer