Epson AcuLaser C8600 Administrator's Manual page 225

You have not set the IP
address for the Internal Print
Server.
Unable to set the IP address using the arp/ping commands.
Cause
The network cable may be
disconnected.
The printer is located beyond
the router.
The Printer Model and IP Address do not appear in the
EpsonNet WinAssist dialog box.
Cause
If the IP address is set to the
default IP address, the items
above may not appear.
Set the IP address for the Internal Print
Server using EpsonNet WinAssist,
MacAssist, the printer's control panel, or
the arp/ping commands. You can check
the IP address on a network status sheet.
See "Configuring Your Printer Using
EpsonNet WinAssist" on page 43,
"Configuring Your Printer Using
EpsonNet MacAssist" on page 70,
"Setting an IP Address on the Printer's
Control Panel" on page 229, or "Setting
an IP Address Using the arp/ping
Command" on page 234.
What to do
Connect the network cable. Also, check
the network environment.
The printer and computer must be in the
same segment.
What to do
Set a valid IP address.
Refresh the status. To do this, select
Refresh from the View menu.
Increase the length of time before a
time-out. To do this, select Timeout from
the Tool menu. Please note that doing so
can cause EpsonNet WinAssist to run
more slowly.
Troubleshooting
13
13
13
13
13
13
13
13
13
13
13
13
215