Chapter 4
EpsonNet WinAssist Configuration Utility
About EpsonNet WinAssist
After changing the network settings of your computer, you need
to configure the Internal Print Server for use on the network, using
EpsonNet WinAssist/MacAssist.
EpsonNet WinAssist is a Windows-based configuration software
for administrators to configure the Internal Print Server for
TCP/IP, NetWare, NetBEUI, AppleTalk, IPP, and SNMP.
Note:
EpsonNet MacAssist is a Macintosh-based configuration software.
See "About EpsonNet MacAssist" on page 69 for details.
Be sure to use EpsonNet WinAssist included on the software
CD-ROM shipped with this printer.
System Requirements
The following table lists the system requirements of EpsonNet
WinAssist.
Operating systems
Hard disk drive space
Windows Me/98/95
Windows 2000 Server/Professional
Windows NT 4.0 Server/Workstation with Service Pack
3.0 or higher
Windows NT 3.51 Server/Workstation with Service
Pack 5.0 or higher
4 MB
EpsonNet WinAssist Configuration Utility
4
4
4
4
4
4
4
4
4
4
4
4
41