Installing Epsonnet Direct Print - Epson AcuLaser C8600 Administrator's Manual

Hard disk space

Installing EpsonNet Direct Print

Follow the steps below to install EpsonNet Direct Print. Be sure
to install EpsonNet Direct Print on a computer connected to the
network.
Note:
If EpsonNet Direct Print version 1 is installed on your computer, you
need to uninstall it before installing EpsonNet Direct Print version 2.x
(the installation program will lead you through uninstalling the older
version of EpsonNet Direct Print).
1. Insert the software CD-ROM shipped with the printer in the
CD-ROM drive.
2. The EPSON Installation Program screen opens automatically.
If the EPSON Installation Program does not start
automatically, click Start and Run. Type D:\EPSETUP.EXE
and click OK. (Substitute the appropriate letter for your
CD-ROM drive as necessary.)
3. Double-click Install EpsonNet Direct Print; or you can also
install by selecting Install EpsonNet Direct Print and then
clicking the arrow at the top right.
4. Follow the on-screen instructions to complete the installation.
5. Restart the computer after installation is complete.
Your computer is now set up to print with LPR via EpsonNet
Direct Print. See the next section to set up your printer.
148 EpsonNet Direct Print
20 MB or more